4G Beerline Cleaner

1. Draw the beer out of the line by flushing through with clean water.
2. Make up in cold water a 1.2% solution of Beerline Cleaner.
3. Draw the Beerline Cleaner solution through the beer line until the line system is completely full.
4. Allow soaking for at least 30 minutes occasionally drawing the fresh solution through the line to assist the cleaning.
5. After 30 minutes rinse the line system through with at least 3 rinses of clean water to ensure that all traces of Beerline Cleaner solution have been removed.
6. The final rinse water can be tested with litmus paper to confirm all the product has been removed from the lines.
7. The beer can then be reconnected to the line and drawn through, being ready for dispensing.

It is recommended that beer dispensing lines are cleaned every week on a regular basis to ensure that soil build-up is minimised.

Appearance: Clear Pale Yellow Liquid

pH: >13.0

Relative Density: 1.11

Odour: Chlorine

Solubility: Fully miscible in water

Non-corrosive toward mild and stainless steel, polythene and polypropylene. Corrosive, both at user concentration or undiluted on aluminium, zinc, tin, copper and their common alloys.