Find Us
Blaris Industrial Estate, Altona Road, Lisburn, BT27 5QB
Contact Us
Email us:
info@ionicproductsltd.com
Technical Support
Call us on:
(+44) 028 92 444 718
Blaris Industrial Estate, Altona Road, Lisburn, BT27 5QB
Email us:
info@ionicproductsltd.com
Call us on:
(+44) 028 92 444 718
Manufactured to ISO 9001, 14001 & 45001 Standards.
Soaking
Appearance: Yellow powder
pH (1%): >13.0
Relative Density: 1.15
Odour: Characteristic
Solubility: Fully miscible in water
Non-corrosive toward mild and stainless steel. Corrosive, both at user concentration and undiluted on aluminium, zinc, tin, copper and their common alloys.
Skin Corr. 1B: H314 – Causes severe skin burns and eye damage.
P280 – Wear protective gloves/protective clothing/eye protection/face protection.
Inhalation: Inhalation of vapour may cause shortness of breath. Move the exposed person to fresh air. Seek medical attention.
Eye contact: Causes burns. Causes severe inflammation and may damage the cornea. Wash with water. Seek medical attention.
Skin contact: Causes burns. Wash off immediately with plenty of soap and water. Remove contaminated clothing. Seek medical attention if irritation or symptoms persist.
Ingestion: Ingestion causes burns to the respiratory tract. DO NOT INDUCE VOMITING. If swallowed, seek medical advice immediately and show this container or label.
An optimal blend of non-ionic surfactants, alkalis and sequestrants resulting in a multi-purpose cleaner for water-resistant hard surfaces.
A highly alkaline detergent is suitable for removing oils, fats and carbonised deposits. Not suitable for use on aluminium or zinc alloys.
A highly alkaline, viscous foaming detergent suitable for removing oils, fats and carbonised deposits from surfaces such as stainless steel.
A multi-purpose powder cleaner for water-resistant hard surfaces efficient in removing the heaviest of residues of grease, oils and fats.