5K Metallised Floor Polish

1. The product is ready to use; apply undiluted.
2. Polish must be applied to a clean grease-free floor.
3. Strip old polish then rinse thoroughly with clean water.
4. Allow the floor to dry.
5. Apply a thin even film of polish using a clean lint-free mop or applicator.
6. When the first coat is dry (approximately 30 minutes) apply a second coat.
7. To enhance the gloss the floor may be buffed.

Appearance: White Liquid

pH (100%): 7.0 – 9.0

Relative Density: 1.03

Odour: Characteristic

Solubility: Fully miscible in water

• Apply product only on stripped, thoroughly rinsed and completely dry floors.
• Do not dilute or mix with other substances.
• Do not store or use at temperatures below 5°C.
• Do not use on structured plastic (cushioned vinyl), unsealed wood or cork floors.
• Do not use outdoors or in wet zones.