12B TFR 1000

Fixed area wash / automatic vehicle wash

1. Use at a concentration of 0.5 –1.5%, following the machine manufacturer’s instructions.

Steam cleaning, hot or cold pressure wash

1. Use at a concentration of 0.5 –2.0%.
2. Lightly wet the vehicle.
3. Spray on the traffic film remover using even sweeps of the lance.
4. Turn off the detergent feed and thoroughly rinse the vehicle.

Floor cleaning -manual

1. Use at a concentration of 0.5 –2.0%.
2. Dose the product into a bucket filled with water and apply the solution.
   Allow to act and scrub, then remove the soiled solution.

Floor cleaning – machine – light/medium soiling

1. Use at a concentration of 0.5 –2.0%.
2. Dose the product into the full water tank of a single disc machine or a scrubber drier and apply the solution.
3. Allow to act briefly and scrub, then remove the soiled solution.

Floor cleaning –machine –heavy soiling

1. Use at a concentration of 0.5 –2.0%.
2. Dose the product into the full water tank of a single disc machine or a scrubber drier and apply the solution
3. Scrub the floor without wet vacuuming, allow the solution to act for 10 minutes.
4. Scrub a second time and directly wet vacuum the soiled solution.
5. To remove stubborn marks apply neat and spot treat.

Appearance: Colourless liquid

pH: >12.0

Relative Density: 1.11

Odour: Characteristic

Solubility: Fully miscible in water

The product must always be tested on alkali sensitive surfaces before use. Never use this product in direct sunlight or allow the product to dry out on the surface or staining may result.