10A Limescale Remover

Descaling

1.  Add solution to the article to be cleaned, for best results heat the solution to 50°C.
2.  Leave to soak until all scale has been removed.
3.  Rinse out thoroughly with clean water.
4.  To ensure no product residue remains a further second rinse is recommended.

(For more information, please refer to the scale/concentration table in the technical information sheet.)

Dishwashing machine descaling 

1. Switch off dosing equipment
2. Fill the dishwasher with fresh water.
3. Add 200ml of Limescale Remover to the water.
4. Circulate the solution for 10-15 minutes.
5. Drain and inspect for complete limescale removal.
6. Repeat if required.
7. Fill the dishwasher with fresh water and circulate with water only for 10 – 15 minutes.
8. Allow drying leaving the door open.
9. Switch on dosing equipment.

Appearance: Red Liquid

pH (100%): <1

Relative Density: 1.09

Odour: Characteristic

Solubility: Fully miscible in water

Do not use on acid-sensitive surfaces, e.g. enamel, marble, grouting or tiles. Immediately remove any drips or splashes from acid-sensitive surfaces and rinse thoroughly with water. Do not mix with bleach or other cleaning products. Test material compatibility in a small, inconspicuous place before use.